Testing Machine

Universal Testing Machine Variety of tests like Tension, Compression, Transverse, etc. are conducted. Continuous roll autographic “Load Vs Elongation” recorder. Extra (Optional) Accessories such as - Extensometer, Pace (load) rate control, Load-Stabilizer, Attachment for - Brinell test, Tensile test for shouldered & threaded, Shear test, Bolts-Nuts & Washer test, Rope test, Flat Belt test, Bend Re-bend test, 180° Bend test, Pull-Out test, Chain testing, etc. Loading Accuracy as high as + 1 % as per BS: 1610 & IS 1828 (Part 1) : 2015.

Features :

• Loading Accuracy as high as + 1 %
• Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials
• High reading accuracy due to large size design of dial.
• Wide range of standard and special accessories, including load stabilizer.
• Large effective clearance between columns enables testing of standards specimens as well as structures.
• Simple controls for easy of operation.
• Robust staining frame of an extremely rigid construction.
• Safe operation ensured be means of safety devices.
• Fully enclosed and protected pendulum.
• Straining at variable speeds to suit a wide range of materials.
• Printer & PC graphs enable study the behavior of the materials.
• Simplicity in reading because of digital readouts.
• Wide range of standard and special accessories, includingload stabilizer, load rate, strain rate control
• Simple controls for easy of operation.
• Robust straining frame of an extremely rigid construction.
• Safe operation ensured be means of safety devices.
• Fully enclosed and protected pressure transducer.
• RS 232 serial port to transfer data to computer for analysis/Storage evaluation etc.
• Manual control & release valve operation.

TENSILE TESTING MACHINE Variety of tests like Tension, Compression, Transverse, etc. are conducted. Continuous roll autographic “Load Vs Elongation” recorder. Extra (Optional) Accessories such as - Extensometer,, Attachment for - Tensile, Rope test, Flat Belt test, wood, paper, rubber, plastic. Loading Accuracy as high as + 1 % as per BS: 1610 & IS 1828 (Part 1) : 2015

Features :

• Loading Accuracy as high as + 1 %

• Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials

• High reading accuracy due to large size design of dial.

• Wide range of standard and special accessories, including load stabilizer.

• Large effective clearance between columns enables testing of standards specimens as well as structures.

• Simple controls for easy of operation. 

• Robust staining frame of an extremely rigid construction.

• Safe operation ensured be means of safety devices. 

• Fully enclosed and protected pendulum.

• Straining at variable speeds to suit a wide range of materials. 

• Printer & PC graphs enable study the behavior of the materials.

• Simplicity in reading because of digital readouts.

• Wide range of standard and special accessories, including load stabilizer, strain rate control

• Simple controls for easy of operation

• Robust straining frame of an extremely rigid construction.

• Safe operation ensured be means of safety devices

• Fully enclosed and protected pressure transducer.

• RS 232 serial port to transfer data to computer for analysis/ Storage evaluation etc

• Manual control & release valve operation

Impact Testing MachineThe pendulum Impact Tester is designed for conducting Izod and Charpy Test. The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy & the lower one for Izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture of the test specimen and is read from the maximum pointer position on the dial scale.It is read on digital readout in case of electronic machinesAccuracy conform to IS:3766-2003, IS:1598-1977, IS:1757-1999, IS:1499-2003, BS:131-Part- I, II, III, IV & BSEN-10045-1993 (ISO 148-2) for Charpy

Hard bearing type horizontal end driven two plane machines and vertical balancing machine with microprocessor based or DSP based measuring panel suitable for balancing of different types of rotors like rotor of electrical machines, fly wheels, crankshafts, submersible pump rotors, etc.Both type of machines are provided with electronic companion software to compensate the unbalance effect due eccentricity between rotating (Spindle ) axis & adaptor (Rotor) axis Additional bed length with or without gap bed arrangement can be provided at extra cost for extra-long rotors. Machines conform to IS:13277-1992

Features :

• Hard bearing type horizontal end driven two plane machineswith microprocessor based measuring panel.

• Measures & stores the unbalance in gms along with the anglefor two selected correction planes on digital display.Minimum achievable unbalance upto 0.5 micron shift in c.g. Various Models

• Suitable for rotors from 0.5 kg to 10,000 kg. Horizontal belt driven hard bearing two plane machines are also supplied for rotors weighing from 0.1 kg upto 3000 kg. Unbalance indication either by stroboscopic method or photo scanning method sensitivity upto 0.5 micron.

• Computerized / Electronic versions with printer facility & special machines to suit customers’ requirements can also be supplied