Latest Products http://www.fineinstruments-calibration.co.in Latest Products Mon, 18 Oct 2021 10:29:37 +0530 en-us http://www.fineinstruments-calibration.co.in Testing Machine http://www.fineinstruments-calibration.co.in/testing-machine.htm http://www.fineinstruments-calibration.co.in/testing-machine.htm Wed, 30 Dec 2020 00:00:00 +0530 Hardness Tester http://www.fineinstruments-calibration.co.in/hardness-tester.htm http://www.fineinstruments-calibration.co.in/hardness-tester.htm Wed, 30 Dec 2020 00:00:00 +0530 Metallurgical Equipment http://www.fineinstruments-calibration.co.in/metallurgical-equipment.htm http://www.fineinstruments-calibration.co.in/metallurgical-equipment.htm Wed, 30 Dec 2020 00:00:00 +0530 Brinell Hardness Tester http://www.fineinstruments-calibration.co.in/brinell-hardness-tester.htm http://www.fineinstruments-calibration.co.in/brinell-hardness-tester.htm Wed, 30 Dec 2020 00:00:00 +0530 This machine is designed for measuring hardness of castings, forgings, other metals & alloys of all kinds, hard or soft, whether round, flat or irregular in shapes. This machine is ideally suitable for laboratories, tool rooms, Heat treatment shops, R&D departments, inspection departments, foundries & educational institutions.Machine designed with a hydraulic power pack and control circuit for effortless loading unloading operation. A dial gauge in front measure depth of ball penetration. Brinell Hardness Tester are suitable for production testing and precision engineered confirming to IS : 1500- 2013, BS : 240 and ASTM : E 10. Machine designed with a hydraulic power pack and control circuit for effortless loading unloading operation. A dial gauge in front measure depth of ball penetration ( Dial Model). The elevating screw of machine is guided in a hardened and ground bush.Positioning of Indentor with swivels facilities for Load and indentation measuring.Machines are provided with measuring system with L. C. 0.01 mm. Optical model is with inbuilt Optical device with 14 x magnification provided in front to project dia of ball impression on glass screen with a micrometer measuring system with 0.01mm accuracy, this ensure       FEATURES   Machine gives fast and accurate results with less operator fatigue.   Machines are with stability and unique design of a floating fulcrum lever system ensures high accuracy & dependability.   The load application system is of dead weight type combined with mechanical lever system.   The supporting hydraulic system is for initial lifting of load before each test and damping the          load application system for smooth application of load.Manual Brinell   Preliminary Test - 2452 N (250 kgf)   Total Test Force – 750, 1000, 3000 kgf).Hydraulic Brinell   Total Test Force – 500 to 3000 kgf in step of 250 kgfOptical Brinell   Total Test Force - 500 to 3000 kgf in step of 250 kgf         Rockwell Hardness Tester http://www.fineinstruments-calibration.co.in/rockwell-hardness-tester.htm http://www.fineinstruments-calibration.co.in/rockwell-hardness-tester.htm Wed, 30 Dec 2020 00:00:00 +0530 This machine is designed for measuring hardness of metals & alloys of all kinds, hard or soft, whether round, flat or irregular in shapes. This machine is ideally suitable for laboratories, tool rooms, Heat treatment shops, R&D departments, inspection departments, foundries & educational institutions. Automatic weight selection, Rockwell hardness scales such as HRA, HRB, HRC, etc. and Superficial scale (HR – N , HR – T) are obtained by using different types of indenter ( Diamond / Ball ). Motorized, Digital and Automatic loading dwell unload version are also available.These testers strictly confirms to IS : 1586-2012 (Rockwell), IS 1500-2013 ( Brinell)   Features : The elevating screw of machine is guided in a hardened and ground bush,  Auto Zero setting Dial Gauge Major Load applied Dwell and unloading by smooth operated Handle Motorized versions are also available with Auto Major Load applying Dwell and Unloading facilities Preliminary Test Force Standard Rockwell - 98.07 N (10kgf).• Preliminary Test Force Superficial Rockwell – 29.42 N (3 kgf).Standard Rockwell Total Test Force - 588.4, 980.7, 1471N (60, 100, 150 kgf). Rockwell cum Superficial Total Test Force - 147.1, 294.2, 441.3, 588.4, 980.7, 1471N (15, 30, 45, 60,100,150 kgf).Rockwell Cum Brinell Total Test Force - 588.4, 980.7, 1471, 1839, 2452N (60, 100, 150, 187.5, 250 kgf)Features : Digital Digital machine having automatic loading/unloading cycle suitable for production testing. The elevating screw of machine is guided in a hardened and ground bush Major Load applied dwell, unloading Automatic. Machines are provided with automatic working cycle and digital LCD display with 0.1 Rockwell resolution. This insures productivity with better accuracy. Hardness is shown on LCD Display with High/Good/Low indication. Serial Interface (RS-232 Port) is provided for connecting it to Computer. Standard Software CD is provided which consists of Serial Suitable for Rockwell, Rockwell superficial and with Brinell Test facilities Test Force Selection by rotating knob Preliminary Test Force Standard Rockwell - 98.07 N (10kgf). Preliminary Test Force Superficial Rockwell – 29.42 N (3 kgf).Standard Rockwell Total Test Force - 588.4, 980.7, 1471N (60, 100, 150 kgf). Rockwell cum Superficial Total Test Force - 147.1, 294.2, 441.3, 588.4, 980.7, 1471N (15, 30, 45, 60,100,150 kgf).Rockwell Cum Brinell Total Test Force - 588.4, 980.7, 1471, 1839, 2452N (60, 100, 150, 187.5, 250 kgf) Digital Rockwell Hardness Tester http://www.fineinstruments-calibration.co.in/digital-rockwell-hardness-tester.htm http://www.fineinstruments-calibration.co.in/digital-rockwell-hardness-tester.htm Wed, 30 Dec 2020 00:00:00 +0530 Computerised Brinell Hardness Tester http://www.fineinstruments-calibration.co.in/computerised-brinell-hardness-tester.htm http://www.fineinstruments-calibration.co.in/computerised-brinell-hardness-tester.htm Wed, 30 Dec 2020 00:00:00 +0530 This machine is designed for measuring hardness of castings, forgings, other metals & alloys of all kinds, hard or soft, whether round, flat or irregular in shapes. This machine is ideally suitable for laboratories, tool rooms, Heat treatment shops, R&D departments, inspection departments, foundries & educational institutions.Machine designed with a hydraulic power pack and control circuit for effortless loading unloading operation. A dial gauge in front measure depth of ball penetration. Brinell Hardness Tester are suitable for production testing and precision engineered confirming to IS : 1500- 2013, BS : 240 and ASTM : E 10   Features : Computerised Machine designed with a hydraulic power pack and control circuit for effortless loading unloading operation. An unlimited number of batches can be created with its own test parameters and certificates. Selection of test load and indentor size with party name, address, certificate no. date batch no. and high and low limits for readings etc. Facility for Auto / Semi Auto / Manual modes of operation. Well managed database saves readings w.r.t. batch and certificate. Report generation in the form of certificate and graph as per customer requirements. Facility for calibration and check of calibration. The range of measurement is from 1mm to 6 mm of diameter with resolution of 0.01mm. Standard Software CD is provided which consists of Serial Number, Hardness values & Limits. Micro Vickers Hardness Tester http://www.fineinstruments-calibration.co.in/micro-vickers-hardness-tester.htm http://www.fineinstruments-calibration.co.in/micro-vickers-hardness-tester.htm Wed, 30 Dec 2020 00:00:00 +0530 Micro Vickers Hardness Tester is a simple and accurate means to produce and measure the diamond indentation. Machine is designed for very wide, from soft metal such as lead, up to the hardest, like hardened steel. This machine is ideally suitable for laboratories, tool rooms, Heat treatment shops, R&D departments, inspection departments, & educational institutions.Machine is designed with control circuit for effortless loading unloading operation. Micro Vickers Hardness Tester are suitable for production testing and precision engineered confirming to IS 1754, IS : 1501- 2013 and ISO 6507- 2   Features : Same hardness number is obtained on the same specimen, regardless of the load applied. The indication is tiny and allows testing of a precision finished part. Thin sheet metal is perfectly tested because the load applied is very small. Built-in projection screen to get accurate results with L. C. 0.025 & 0.01 µm The load application system is very high precision accurate and dependably with dead weight type mechanism. Test Load 10gms to 1 kgf, 10 gms to 2 kgf, 200 gms to 5 kgf, 5 gms to 5 kgf as per the mode and application. Computerised Vickers Hardness Tester http://www.fineinstruments-calibration.co.in/computerised-vickers-hardness-tester.htm http://www.fineinstruments-calibration.co.in/computerised-vickers-hardness-tester.htm Wed, 30 Dec 2020 00:00:00 +0530 Vickers Hardness Tester http://www.fineinstruments-calibration.co.in/vickers-hardness-tester.htm http://www.fineinstruments-calibration.co.in/vickers-hardness-tester.htm Wed, 30 Dec 2020 00:00:00 +0530 Portable Hardness Tester http://www.fineinstruments-calibration.co.in/portable-hardness-tester.htm http://www.fineinstruments-calibration.co.in/portable-hardness-tester.htm Wed, 30 Dec 2020 00:00:00 +0530 Digital Portable Hardness Tester http://www.fineinstruments-calibration.co.in/digital-portable-hardness-tester.htm http://www.fineinstruments-calibration.co.in/digital-portable-hardness-tester.htm Wed, 30 Dec 2020 00:00:00 +0530 Dynamic Balancing Machine http://www.fineinstruments-calibration.co.in/dynamic-balancing-machine.htm http://www.fineinstruments-calibration.co.in/dynamic-balancing-machine.htm Wed, 30 Dec 2020 00:00:00 +0530 Hard bearing type horizontal end driven two plane machines and vertical balancing machine with microprocessor based or DSP based measuring panel suitable for balancing of different types of rotors like rotor of electrical machines, fly wheels, crankshafts, submersible pump rotors, etc.Both type of machines are provided with electronic companion software to compensate the unbalance effect due eccentricity between rotating (Spindle ) axis & adaptor (Rotor) axis Additional bed length with or without gap bed arrangement can be provided at extra cost for extra-long rotors. Machines conform to IS:13277-1992   Features : Hard bearing type horizontal end driven two plane machineswith microprocessor based measuring panel. Measures & stores the unbalance in gms along with the anglefor two selected correction planes on digital display.Minimum achievable unbalance upto 0.5 micron shift in c.g. Various Models Suitable for rotors from 0.5 kg to 10,000 kg. Horizontal belt driven hard bearing two plane machines are also supplied for rotors weighing from 0.1 kg upto 3000 kg. Unbalance indication either by stroboscopic method or photo scanning method sensitivity upto 0.5 micron. Computerized / Electronic versions with printer facility & special machines to suit customers’ requirements can also be supplied Impact Testing Machine http://www.fineinstruments-calibration.co.in/impact-testing-machine.htm http://www.fineinstruments-calibration.co.in/impact-testing-machine.htm Wed, 30 Dec 2020 00:00:00 +0530 Impact Testing MachineThe pendulum Impact Tester is designed for conducting Izod and Charpy Test. The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy & the lower one for Izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture of the test specimen and is read from the maximum pointer position on the dial scale.It is read on digital readout in case of electronic machinesAccuracy conform to IS:3766-2003, IS:1598-1977, IS:1757-1999, IS:1499-2003, BS:131-Part- I, II, III, IV & BSEN-10045-1993 (ISO 148-2) for Charpy Tensile Testing Machine http://www.fineinstruments-calibration.co.in/tensile-testing-machine.htm http://www.fineinstruments-calibration.co.in/tensile-testing-machine.htm Wed, 30 Dec 2020 00:00:00 +0530 TENSILE TESTING MACHINE Variety of tests like Tension, Compression, Transverse, etc. are conducted. Continuous roll autographic “Load Vs Elongation” recorder. Extra (Optional) Accessories such as - Extensometer,, Attachment for - Tensile, Rope test, Flat Belt test, wood, paper, rubber, plastic. Loading Accuracy as high as + 1 % as per BS: 1610 & IS 1828 (Part 1) : 2015   Features : Loading Accuracy as high as + 1 % Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials High reading accuracy due to large size design of dial. Wide range of standard and special accessories, including load stabilizer. Large effective clearance between columns enables testing of standards specimens as well as structures. Simple controls for easy of operation.  Robust staining frame of an extremely rigid construction. Safe operation ensured be means of safety devices.  Fully enclosed and protected pendulum. Straining at variable speeds to suit a wide range of materials.  Printer & PC graphs enable study the behavior of the materials. Simplicity in reading because of digital readouts. Wide range of standard and special accessories, including load stabilizer, strain rate control Simple controls for easy of operation Robust straining frame of an extremely rigid construction. Safe operation ensured be means of safety devices Fully enclosed and protected pressure transducer. RS 232 serial port to transfer data to computer for analysis/ Storage evaluation etc Manual control & release valve operation Universal Testing Machine http://www.fineinstruments-calibration.co.in/universal-testing-machine.htm http://www.fineinstruments-calibration.co.in/universal-testing-machine.htm Wed, 30 Dec 2020 00:00:00 +0530 Universal Testing Machine Variety of tests like Tension, Compression, Transverse, etc. are conducted. Continuous roll autographic “Load Vs Elongation” recorder. Extra (Optional) Accessories such as - Extensometer, Pace (load) rate control, Load-Stabilizer, Attachment for - Brinell test, Tensile test for shouldered & threaded, Shear test, Bolts-Nuts & Washer test, Rope test, Flat Belt test, Bend Re-bend test, 180° Bend test, Pull-Out test, Chain testing, etc. Loading Accuracy as high as + 1 % as per BS: 1610 & IS 1828 (Part 1) : 2015.   Features : Loading Accuracy as high as + 1 % Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials High reading accuracy due to large size design of dial. Wide range of standard and special accessories, including load stabilizer. Large effective clearance between columns enables testing of standards specimens as well as structures. Simple controls for easy of operation. Robust staining frame of an extremely rigid construction. Safe operation ensured be means of safety devices. Fully enclosed and protected pendulum. Straining at variable speeds to suit a wide range of materials. Printer & PC graphs enable study the behavior of the materials. Simplicity in reading because of digital readouts. Wide range of standard and special accessories, includingload stabilizer, load rate, strain rate control Simple controls for easy of operation. Robust straining frame of an extremely rigid construction. Safe operation ensured be means of safety devices. Fully enclosed and protected pressure transducer. RS 232 serial port to transfer data to computer for analysis/Storage evaluation etc. Manual control & release valve operation. Torsion Testing Machine http://www.fineinstruments-calibration.co.in/torsion-testing-machine.htm http://www.fineinstruments-calibration.co.in/torsion-testing-machine.htm Wed, 30 Dec 2020 00:00:00 +0530 Fatigue Testing Machine http://www.fineinstruments-calibration.co.in/fatigue-testing-machine.htm http://www.fineinstruments-calibration.co.in/fatigue-testing-machine.htm Wed, 30 Dec 2020 00:00:00 +0530 Compression Testing Machine http://www.fineinstruments-calibration.co.in/compression-testing-machine.htm http://www.fineinstruments-calibration.co.in/compression-testing-machine.htm Wed, 30 Dec 2020 00:00:00 +0530 Metallurgical Microscope http://www.fineinstruments-calibration.co.in/metallurgical-microscope.htm http://www.fineinstruments-calibration.co.in/metallurgical-microscope.htm Wed, 30 Dec 2020 00:00:00 +0530 Stereo Zoom Microscope http://www.fineinstruments-calibration.co.in/stereo-zoom-microscope.htm http://www.fineinstruments-calibration.co.in/stereo-zoom-microscope.htm Wed, 30 Dec 2020 00:00:00 +0530 Profile Projector http://www.fineinstruments-calibration.co.in/profile-projector.htm http://www.fineinstruments-calibration.co.in/profile-projector.htm Wed, 30 Dec 2020 00:00:00 +0530 Abrasive Cutting Machine http://www.fineinstruments-calibration.co.in/abrasive-cutting-machine.htm http://www.fineinstruments-calibration.co.in/abrasive-cutting-machine.htm Wed, 30 Dec 2020 00:00:00 +0530 Abrasive cutter is rugged, sturdy and designed to cut Metallurgical Samples to optimal quality consistently and safely . Cutting Wheel spindle is connected with motor shaft by pulley and belt mechanism. The movement of cutting wheel towards the specimen is applied by handle fixed with motor base pivot spindle and the cutter unit is balanced by springs for smooth chop type movement. Corrosion resistant window. Cooling by two high flow water jets to provide optimum cooling. Large (25mm) drain, re-circulation coolant tank with 30LTR. Capacity Working on 440 volts, AC main supply with coolant tank of sufficient capacity. The chop type cut off wheel machine is suitable for quick and clean cutting of metallography specimen from rods & tubes etc. X-Y Movement Vice is made up of M.S, Specially designed. Coolant circulation System is provided with suitable filtering arrangement. Light attachments system is provided for clean and accurate cutting of samples Heavy Duty motor is provided 2/3/5 H.P , 3 Phase. Large Viewing window to monitor the cutting operation. Technical Data- Operation -Manually by moving motor to cut the sampl. Cutting Operation :- By manual cutt-off wheel in chop type procedur. Polishing Machine http://www.fineinstruments-calibration.co.in/polishing-machine.htm http://www.fineinstruments-calibration.co.in/polishing-machine.htm Wed, 30 Dec 2020 00:00:00 +0530 Hot Mounting Molding Machine http://www.fineinstruments-calibration.co.in/hot-mounting-molding-machine.htm http://www.fineinstruments-calibration.co.in/hot-mounting-molding-machine.htm Wed, 30 Dec 2020 00:00:00 +0530 Muffle Furnace http://www.fineinstruments-calibration.co.in/muffle-furnace.htm http://www.fineinstruments-calibration.co.in/muffle-furnace.htm Wed, 30 Dec 2020 00:00:00 +0530 Belt Grinders http://www.fineinstruments-calibration.co.in/belt-grinders.htm http://www.fineinstruments-calibration.co.in/belt-grinders.htm Wed, 30 Dec 2020 00:00:00 +0530 Spectro Polishing Machine http://www.fineinstruments-calibration.co.in/spectro-polishing-machine.htm http://www.fineinstruments-calibration.co.in/spectro-polishing-machine.htm Wed, 30 Dec 2020 00:00:00 +0530 Spring Testing Machine http://www.fineinstruments-calibration.co.in/spring-testing-machine.htm http://www.fineinstruments-calibration.co.in/spring-testing-machine.htm Wed, 30 Dec 2020 00:00:00 +0530 MPI Testing Machine http://www.fineinstruments-calibration.co.in/mpi-testing-machine.htm http://www.fineinstruments-calibration.co.in/mpi-testing-machine.htm Wed, 30 Dec 2020 00:00:00 +0530 The Magnetic Particle Inspection method of Non-Destructive testing is a method for locating surface and sub-surface discontinuities in ferromagnetic material. Magnetic Particle Testing is the most reliable method for detecting surface cracks in steel and iron components. We offer you a great selection of equipment and supplies. Whether you need a portable Yoke or Coil, Portable or Mobile tester or a conventional or 3-D multi-directional Wet Horizontal Bench Tester we can provide you with the best value in equipment and supplies.    It depends for its operation on the face that when the material or part under test is magnetized, discontinuities that lie in a direction generally transverse to the direction of the magnetic field, will cause a leakage field, and therefore, the presence of the discontinuity, is detected by use of finely divided ferromagnetic particles applied over the surface, some of these particles being gathered and held by the leakage field, this magnetically held collection of particles forms an outline of the discontinuity and indicates its location, size, shape and extent.   Dry magnetic particle examinations and wet fluorescent magnetic particle examinations are performed on ferromagnetic materials to detect surface and slight subsurface discontinuities. Specialized wet fluorescent magnetic particle techniques are available for black light internal examinations. Coating Thickness Gauge http://www.fineinstruments-calibration.co.in/coating-thickness-gauge.htm http://www.fineinstruments-calibration.co.in/coating-thickness-gauge.htm Wed, 30 Dec 2020 00:00:00 +0530 It is applicable to measure non-magnetic painting, ceramic, enamel, plastic, rubber coating on magnetic base materials such as iron and steel, non- ferrous metal plating such as nickel & chromium, anticorrosive coating, non- conductive painting, plastic coating and anodic oxide film on non-magnetic conductive devices  It has a wide range of measurement facilities up to 1200 Microns coating thickness for respective model. Instruments are available without Probe and with probe. Surface Roughness Tester http://www.fineinstruments-calibration.co.in/surface-roughness-tester.htm http://www.fineinstruments-calibration.co.in/surface-roughness-tester.htm Wed, 30 Dec 2020 00:00:00 +0530 Diamond Ball Indenter http://www.fineinstruments-calibration.co.in/diamond-ball-indenter.htm http://www.fineinstruments-calibration.co.in/diamond-ball-indenter.htm Wed, 30 Dec 2020 00:00:00 +0530 Testing Machine Spare Parts http://www.fineinstruments-calibration.co.in/testing-machine-spare-parts.htm http://www.fineinstruments-calibration.co.in/testing-machine-spare-parts.htm Wed, 30 Dec 2020 00:00:00 +0530 Diamond Polishing Paste & Spray http://www.fineinstruments-calibration.co.in/diamond-polishing-paste-spray.htm http://www.fineinstruments-calibration.co.in/diamond-polishing-paste-spray.htm Wed, 30 Dec 2020 00:00:00 +0530 Metallurgical Consumable http://www.fineinstruments-calibration.co.in/metallurgical-consumable.htm http://www.fineinstruments-calibration.co.in/metallurgical-consumable.htm Wed, 30 Dec 2020 00:00:00 +0530 Mechanical Extensometer http://www.fineinstruments-calibration.co.in/mechanical-extensometer.htm http://www.fineinstruments-calibration.co.in/mechanical-extensometer.htm Wed, 30 Dec 2020 00:00:00 +0530